Wire cutting machine

MFQ steel wire rope cutter, is mainly composed of the power source (with electric, manual pump), the work of the fuel tank, slide rail and cutting blade, it has a reasonable structure, convenient operation, cut off fast, labor-saving advantages, especially due to the split-type structure, thereby avoiding the careless operation of wounding bombs thrown rope. The device will not only cut off 32-52 mm steel wire rope, but also cut off the specifications low 20 mm round bar. The cutter is a national initiative, widely used in metallurgy, mining, oil, bridges and other engineering departments. Using Method: 1. To connect the fuel tank and pumps with a high pressure hose, and tighten the oil bolt. 2. Pull out the movable pin, rotate the slide, and then put the cut wire rope in the slot (direct penetration), install the movable pin. 3. Press the handle moving up and down, so that the blade forward, cutting off action can be realized 4. Forward action completed, loose the oil bolts, so that return a knife to prepare the next actionTypeRated PressureBlade strokeCut off the largest wire ropeOutline SizemmMFQ-3263MPa40mmΦ32600x230x120MFQ-5263MPa58mmΦ52600x350x350